Skip to content
Silver Nissan Sentra in the Window Tint Solutions bay under hexagon lights on a checker floor
Home/Tint Removal
Tint removal

Window Tint Removal in Houston, TX

Bubbling, peeling, faded or purple tint? We remove old film and adhesive carefully at our Hollister Rd shop, so your glass is ready for a clean re-tint.

BubblingPeelingPurple or faded
Done at our shopCareful with defroster linesUsually adds 1–2 hours
Why remove it

Old tint only gets worse

Old window tint doesn't just make a vehicle look worn out. It can hurt visibility, make the interior feel neglected and cause problems when it's time for new film.

Old film can be hard to remove cleanly, especially after years of Texas heat. Peeling it off yourself often leaves adhesive and residue behind — and rear windows need extra care so the defroster lines aren't damaged.

We take the old film and adhesive off carefully in our shop, clean the glass and get it ready for whatever comes next — usually a new HITEK Standard, Ceramic IR or Ceramic Ultra install.

At a glance

Signs it's timeBubbles, peeling, purple or faded film
TimeUsually adds 1–2 hours
WhereAt our Houston shop
Next stepRe-tint with HITEK film
Signs it's time

When tint needs to come off

If you see any of these, cleaning won't fix it — the problem is inside the film or the adhesive.

Bubbling

Air pockets mean the adhesive is failing, and bubbles tend to spread.

Peeling edges

Lifting corners collect dirt and keep peeling.

Purple or faded film

Discolored film has broken down and no longer blocks heat the way it did.

Haze or poor visibility

Hazy, distorted film makes it harder to see, especially at night.

How it works

Removal done right

Old film comes off carefully, and the glass is ready for new tint.

Look at the film

We check the condition of your tint and give you a realistic time estimate once we see the vehicle.

Remove film and adhesive

Old film and leftover adhesive come off carefully, with extra care on rear windows and defroster lines.

Clean and prep

The glass is cleaned so new film bonds properly.

Re-tint

Choose HITEK Standard (5-year warranty) or Ceramic IR or Ceramic Ultra (lifetime warranty) for your new tint.

From the shop

Vehicles finished at our shop

Clean glass and fresh HITEK tint at Window Tint Solutions.

Visit the shop

Bring it in for removal

Call or text (346) 880-7551 or send your vehicle details, and tell us what your current tint looks like.

Call or text346-880-7551
Visit the shop4123 Hollister rd, Suite J · Houston, TX 77080
Mon–Fri9:00a – 6:00p
Sat–Sun9:00a – 5:00p
Window tint solutions4123 Hollister rd, Suite J · Houston, TX 77080
Directions →
FAQ

Tint removal FAQ

Does my tint need to come off, or just a cleaning?
If the film has any bubbling, peeling, discoloration or haze, cleaning won't fix it — those problems are inside the film or the adhesive layer. A quick look at the vehicle in person is the easiest way to confirm.
Can old tint be removed without damaging my windows?
Yes, when it's done correctly. Careful removal in our shop protects the glass and the defroster lines on rear windows, which is a big part of why we don't offer mobile removal.
How long does removal and re-tinting take?
Removal usually adds 1 to 2 hours on top of the new tint itself (about 2 to 3 hours for a typical sedan), depending on the age and condition of the old film and adhesive. Film that has baked in Texas heat for years takes longer. We'll give you a realistic estimate once we see the vehicle.
Can you remove the old tint and install new tint the same day?
Yes. We remove the old film, clean the glass and install your new HITEK tint in the same visit.
Can I upgrade from standard tint to ceramic?
Yes. We can remove existing standard tint and install Ceramic IR or Ceramic Ultra whenever you're ready — no need to wait until the old film fails.

Re-tinting after removal? Compare our HITEK films →

Ready for a fresh start?

Get a quote for tint removal and a new HITEK tint install.